9. Flash – Setting Flash
309
[Flash Mode]
Sets the flash mode.
1
[ ] [ ] Select [Flash Mode]
[ ] (Forced Flash On)/[ ] (Forced On/Red-Eye)
The flash fires every time regardless of the recording conditions.
This is suitable for recording when there is backlighting or under lighting such
as fluorescent lighting.
[ ] (Slow Sync.)/[ ] (Slow Sync./Red-Eye)
When recording images against a nightscape, this will slow the shutter speed
when the flash fires to make not only the subject but also the nightscape appear
brighter.
• Slower shutter speeds may result in blurry images. To avoid this, we
recommend using a tripod.
[ ] (Forced Flash Off)
The flash does not fire.
To Next Page
Loading...
