9. Flash – Setting Flash
312
[MANUAL]
Sets the flash output manually.
• With [TTL], you can record the images you want even when recording dark
scenes where the flash output tends to become greater.
• The flash output ([1/1], etc.) is displayed on the flash icon of the recording
screen.
2
(When set to [MANUAL]) Select [Manual Flash Adjust.]
and then press or .
3
Press 21 to set the flash output and then press or
.
• It can be set within the range of [1/1] (full flash output) to [1/128] in 1/3 steps.
To Next Page
Loading...
