10. Recording Videos – Main Assist Functions
376
2
Select the position where you want to measure the
luminance.
≥Press 3421 to select and then press or .
•
You can also change the position by dragging the frame on the recording
screen.
• To return the position back to the center, press [DISP.].
(A) Luminance value
Measurement Range
Measuring is possible in the range j7 % to 109 % (IRE).
•
When [Photo Style] is set to [V-Log L], this can be measured with “Stop” units.
(Calculated as “0 Stop”=42 % (IRE))
(A)
To Next Page
Loading...
