14. Menu Guide – [Photo] Menu
524
[Focus Peaking]
[1-Area AF Moving Speed]
[ON]/[OFF]
[SET]
[Focus Peaking Sensitivity]
[Display Color]
[Display During AFS]
During MF operation, in-focus portions (portions on the screen with clear outlines)
are highlighted with color.
• If the [Focus Peaking Sensitivity] is adjusted to the negative direction, portions to
be highlighted are reduced, allowing you to achieve a more precise focus.
• With [Display Color], you can set the display color of the in-focus portion.
• When [Display During AFS] is set to [ON], the Focus Peaking display is also
possible when the shutter button is pressed halfway in the [AFS] focus mode.
• You can display the Touch Tab ([Touch Settings]: 559) and then touch [ ] in
[ ] to switch [ON]/[OFF].
• When [Rough Monochrome] of [Filter Settings] is being used, [Focus Peaking] is
not available.
• When [Live View Boost] is being used, [Focus Peaking] is not available.
[FAST]/[NORMAL]
Sets the speed when moving a single AF area.
To Next Page
Loading...
