14. Menu Guide – [Custom] Menu
573
[Level Gauge]
[Luminance Spot Meter]
[Framing Outline]
[ON]/[OFF]
Displays the level gauge which is useful in correcting camera tilt.
(A) Horizontal
(B) Vertical
(C) Green (no tilt)
• Even after correcting the tilt, there may still be an error of approx. n1o.
• When the camera is tilted significantly upwards or downwards, the level gauge
may not be displayed correctly.
• You can adjust the level gauge and reset the adjusted values in [Level Gauge
Adjust.] in the [Setup] ([Monitor / Display]) menu. ([Level Gauge Adjust.]: 587)
[ON]/[OFF]
Specify any spot on the subject to measure the luminance over a small area.
([Luminance Spot Meter]: 375)
[ON]/[OFF]
Displays the outline for the live view.
To Next Page
Loading...
