15. Wi-Fi/Bluetooth – Connecting to a Smartphone
625
3 On the smartphone, start up “LUMIX Sync”.
• If a message is displayed indicating that the smartphone is searching for
cameras, close the message.
4 Select [ ].
5 Select [Wi-Fi connection].
6 Select [QR code].
7 Scan the QR code displayed on the screen of the camera using “ LUMIX Sync ”.
• (iOS devices) When a message to confirm the change of destination is
displayed, select [Join].
8 (At the first connection) Confirm the device name displayed on the screen of the
camera and then select [Yes].
To Next Page
Loading...
