15. Wi-Fi/Bluetooth – Wi-Fi Connections
665
Connecting by Manual Input
1 In the screen in Step 1 of “[From List]”, select [Manual Input].
2 Enter the SSID of the wireless access point you are connecting to, and then
select [Set].
• How to enter characters (Entering Characters: 609)
3 Select the network authentication.
[WPA2-PSK]/[WPA2/WPA-PSK]
Supported encryption: [TKIP], [AES]
[No Encryption]
4 (When other than [No Encryption] is selected) Enter the encryption key and then
select [Set].
• Check the SSID, network authentication, encryption, and encryption key of the
wireless access point you are using.
To Next Page
Loading...
