16. Streaming Function – Stream by Operating a Smartphone
678
4 Set streaming details.
[Wi-Fi Connection Setting]: Sets the wireless access point the camera
connects to when streaming.
[Streaming Quality]: Sets the image quality that will be streamed.
[Privacy settings]: Selects privacy setting.
5 Select [Set to the camera].
• If the message [Unable to confirm security of the streaming address.
Continue?] is displayed, check that the URL of the streaming destination
is correct before continuing the connecting operation.
• The settings will be sent from the smartphone to the camera.
• The [Streaming Setup] of the camera turns [ON], and the camera
connects via Wi-Fi to the access point.
• [ ] is displayed on the recording screen.
3
Start streaming.
≥Select [Start streaming] on “LUMIX Sync”.
≥[ ] is displayed on the recording screen.
4
Stop streaming.
≥Select [Stop streaming] on “LUMIX Sync”.
5
End the streaming function.
≥If you select [End streaming] on “ LUMIX Sync”, the [Streaming
Setup] of the camera will be set to [OFF].
To Next Page
Loading...
