Even if you end burst recording after a short time, the camera may go on record for a certain period.
To record the subject with reduced blur
1. Set the mode dial to [S].
2. Rotate the control dial to set the shutter speed.
•Approximate shutter speed for outdoor recording in fine weather conditions: 1/1000 seconds or faster.
•If you increase the shutter speed, the ISO sensitivity becomes higher, which may increase the noise on the
screen.
Selecting pictures from 4K burst file and saving
1. Press [ ].
2. Press the cursor buttons to select a 4K burst file.
4K burst files are displayed with [ ].
3. Press the cursor button .
If the image was recorded with [ ] ([4K Pre-Burst]), proceed to step5.
4. Drag the slide bar to make a rough selection of scenes.
5. Drag the frames to select the frame you want to save as a picture.
6. Touch [ ] to save the picture.
•The picture will be saved in JPEG format.
To Next Page
Loading...
