Controlling Focus After Recording (Post Focus/Focus Stacking)
The camera can perform Burst recording in the same picture quality as 4K photo recording while automatically
shifting the focus to different areas. After the recording, you can select the desired area on the screen and save a
picture in which the selected area is in focus.
Recording using [Post Focus]
We recommend that you use a tripod when recording images to be used for Focus Stacking.
1. Press [ ].
2. Press the cursor buttons to select [ON] and then press [MENU/SET].
3. Press the shutter button fully to start recording.
Cancelling [Post Focus]: In step 2, select [OFF].
Selecting the desired focus area and saving a picture
1. Press [ ].
2. Select an image with the [ ] icon on the playback screen and press the cursor button .
3. Touch the desired focus area.
If a picture that is in focus is not available for the selected area, a red frame will be displayed. You cannot save
a picture in this case.
4. Touch [ ] to save the picture. The picture will be saved in JPEG format.
To Next Page
Loading...
