283
Wi-Fi/Bluetooth
Sending pictures to a PC
Sending pictures to a PC
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Send Images While Recording] / [Send Images Stored in the Camera]
→ [PC]
1
Select [Via Network] or [Direct] to connect (→291, 294)
2
Select the PC you want to connect to
• If the PC you want to connect to is not displayed, select [Manual Input], then enter the computer
name (for Mac, enter the NetBIOS name).
3
Select the folder you want to send to
4
Check the send settings, and select [Set]
• To change the send setting, press the [DISP.] button. (→278)
[Send Images While Recording]
5
Take a still picture (→276)
[Send Images Stored in the Camera]
5
Select the picture (→277)
●
Folders sorted by the sent date are created in the specified folder, and pictures are saved in those
folders.
●
If the screen for a user account and password entry appears, enter the one you set on your PC.
●
If the computer name (for Mac, the NetBIOS name) contains spaces, etc., the name may not be
properly recognised. If you cannot connect, we recommend changing the computer name (for
Mac, the NetBIOS name) to a combination of 15 or less alphanumeric characters only.
●
If a firewall is enabled by the OS or security software, this unit may be unable to connect to the
computer.
●
When [Auto Transfer] in the [Bluetooth] is set to [ON], [Wi-Fi Function] is disabled.
To Next Page
Loading...
Need help?
General
