70
Wi-Fi/Bluetooth
DVQX1394 (ENG)
■
Turning off the camera with the smartphone
Select [ ]
Select [ OFF]
●
When [Remote Wakeup] is set to [ON], the Bluetooth function continues to
operate even after the camera is turned off, thus causing the battery to drain.
Operating the shutter button of the camera using a
smartphone (remote recording)
Wireless connectivity required:
Wi-Fi
1
Connect to a smartphone (→65)
2
Operate the smartphone
If the camera is already connected to the smartphone via Bluetooth, select
[
] → [Remote operation].
(iOS devices) When you need to change the connected device on the Wi-Fi
setup screen, follow the on-screen message to change the setting.
Select [ ]
Take pictures
• The recorded images are saved in the camera.
• Some settings are not available.
Using the smartphone to operate the shutter button via a
Bluetooth connection only
Wireless connectivity required:
Bluetooth
1
Make a Bluetooth connection to the smartphone (→66)
2
Operate the smartphone
Select [ ]
Select [Shutter Remote Control]
Take pictures
• [Shutter Remote Control] is available only when the Camera [ON/OFF]
switch is set to [ON].
To Next Page
Loading...
