293
Wi-Fi/Bluetooth
About Wi-Fi connections
■
When connecting with [Manual Input]
• When connecting by [Manual Input], confirm SSID, network authentication type,
encryption type, encryption key of the wireless access point you are using.
On the screen of step
1
of “If you are not sure about the WPS compatibility (connecting
by [From List])”, select [Manual Input]
Enter the SSID of the wireless access point you are connecting to, then select [Set]
• For details on how to enter characters, refer to “Entering Text” (→63)
Select the network authentication type
[WPA2-PSK]
Supported encryption methods: [TKIP] / [AES]
[WPA2/WPA-PSK]
[No Encryption] —
(When an option other than [No Encryption] is selected)
Enter the encryption key
●
Check the wireless access points instruction manual and settings when saving a wireless access
point.
●
If no connection can be established, the wireless access point’s radio waves may be too weak.
Refer to “Message displays” (→323) and “Q&A Troubleshooting” (→329) for details.
●
Transmission speed may decrease, or may not be usable depending on the environment it is used
in.
To Next Page
Loading...
Need help?
General
