37
DVQX1394 (ENG)
Recording
●
If the surrounding temperature is high or 4K photos are recorded continuously,
[
] may be displayed and recording may be stopped halfway through. Wait
until the camera cools down.
●
When [ ] ([4K Pre-Burst]) or [Pre-Burst Recording] is set, the battery
drains faster and the camera temperature rises.
Select [
] ([4K Pre-Burst]) or [Pre-Burst Recording] only when recording.
●
4K burst file will be recorded and played back in separate files in the following
cases. (You can continue recording without interruption.)
• When using an SDHC memory card: If the file size exceeds 4 GB
• When using an SDXC memory card: If the continuous recording time exceeds
3 hours and 4 minutes or if the file size exceeds 96 GB
Selecting pictures from 4K burst file and saving
1
Select a picture with the [ ] on the
playback screen, and press
• In the case of recording with [ ] ([4K Pre-
Burst]), proceed to the step
3
.
2
Drag the slide bar to perform rough scene
selection
• When [ ] is touched, the marker operation
screen appears. (→38)
3
Drag to select the frame you want to save
as a picture
• To continuously rewind/forward the scene or
frame-by-frame, touch and hold [
]/[ ] .
4
Touch [ ] to save the picture
• The selected picture will be saved as a new picture in the JPEG format
separate from the 4K burst file.
●
If you use [4K PHOTO Bulk Saving] (→56) in the [Playback] menu, you can bulk
save 5 seconds’ worth of 4K recording.
To Next Page
Loading...
