25
Preparations
Charging battery
■
Connect the USB connection cable (supplied) to the [USB/CHARGE] socket
[USB/CHARGE] socket
• This terminal is located at the bottom when the camera is in an
upright position.
• Always check the direction of the socket, and hold the plug straight to
insert or remove it. (If the cable is inserted in the wrong direction, the
socket could become deformed and cause faulty operation.)
Also, do not insert into the wrong socket. Doing so may cause damage
to this unit.
●
If the computer enters sleep mode during charging, charging may be stopped.
●
If a notebook computer that is not connected to an electrical outlet is connected to the camera,
the battery of the notebook computer will be depleted. Do not leave the camera and notebook
connected for a long period of time.
●
Always connect the USB connection cable to the USB connector on your computer. Do not
connect the USB connection cable to the USB connector of the monitor, keyboard, printer, or USB
hub.
Charging lamp indications
Charging lamp (Red)
On: Charging in progress
Off: Charging complete
(After charging stops, disconnect the camera
from the electrical outlet or your computer.)
Flashing: Charging error
(For instructions on correcting the problem,
refer to (→324).)
To Next Page
Loading...
Need help?
General
