Panasonic lumix DC-TZ90 Operating Instructions For Advanced Features

242
DVQP1304
Wi-Fi
Preparation
Install “Image App” in advance. (→228)
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Send Images While Recording] / [Send Images Stored in the Camera]
→ [Smartphone]
1
Select [Via Network] or [Direct] to connect (→256, 258)
(On your smartphone)
■
When connecting with [Via Network]
Set Wi-Fi function to “ON”
Select a wireless access point and set
Start “Image App”
■
When connecting with [WPS Connection]
*
in [Direct]
Start “Image App”
*
WPS refers to a function that allows you to easily configure the settings related to the connection
and security of wireless LAN devices. To check if the smartphone you are using is compatible
with WPS, refer to the instruction manual of the smartphone.
■
When connecting with [Manual Connection] in [Direct]
Set Wi-Fi function to “ON”
Select the SSID displayed on this unit
Start “Image App”
2
Select the device you wish to connect to
3
Check the send settings, and select [Set]
• To change the send setting, press the [DISP.] button. (→241)
[Send Images While Recording]
4
Take a still picture (→239)
[Send Images Stored in the Camera]
4
Select the picture (→240)
Sending pictures to a smartphone

Panasonic lumix DC-TZ90 Specifications

General

Sensor	1/2.3-inch High Sensitivity MOS Sensor
Effective Pixels	20.3 Megapixels
Lens	LEICA DC VARIO-ELMAR
Dimensions	112.0 x 67.3 x 41.2 mm
Focal Length	4.3 - 129mm (24 - 720mm in 35mm equivalent)
Aperture	F3.3 - F6.4
ISO Sensitivity	80-3200 (expandable to 6400)
Display	3.0-inch TFT Screen LCD Display (1040K dots)
Viewfinder	0.2-inch EVF (1166K dots)
Video Recording	4K UHD (3840x2160) at 30p/25p
Connectivity	Wi-Fi
Battery Life	Approx. 380 shots (CIPA standard)
Weight	Approx. 322g with Battery and SD Memory Card
Storage Media	SD/SDHC/SDXC memory card
Image Stabilization	5-axis Hybrid O.I.S. (Optical Image Stabilizer)