18
Basics
DVQX1237 (ENG)
●
When you open the monitor, the display automatically switches to monitor
display, and the [LVF] button and eye sensor are disabled.
Shutter button (Taking pictures)
1
Press the shutter button halfway (press lightly) to focus
on the subject
Aperture value
Shutter speed
Focus display
( When focus is aligned: illuminated
When focus is not aligned: flashing)
• If the aperture value and shutter speed are shown in red and flashing, you do
not have the appropriate exposure, unless you are using the flash.
2
Press the shutter button fully (push the button all the
way), and take the picture
●
Pictures can be taken only when the image is correctly focused as long as
the [Focus/Release Priority] (→44) is set to [FOCUS].
■
Estimated number of recordable pictures
1450: When [Aspect Ratio] is set to [4:3], [Quality] is set to [ ], [Picture Size] is
set to [L] (20M), and using a card of 16 GB
To Next Page
Loading...
Need help?
General
