Panasonic LUMIX DC-TZ99 - Cursor Button; [MENU;SET] Button (Selecting;Setting Items); (Switching the Display Information)

40
Basics
Basic Operation
Cursor button / [MENU/SET] button (Selecting/setting items)
Pressing the cursor button:
Selection of items or setting of values etc., is performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.
[DISP.] button (Switching the display information)
1
Press [DISP.] button to switch the display
During recording
You can switch the monitor display method.
With information Without information
With information
+
level gauge
Without information
+
level gauge
50
p
50
p