47
DVQX2305 (ENG)
Menu
[Sequence Composition]
Select multiple frames from a 4K burst file to create a sequence composition of a
moving subject into one picture.
→ [Playback] → [Sequence Composition]
1
Use to select the 4K burst files and press [MENU/SET]
2
Select frames to combine
Select the frames so that the moving subject will not overlap on the preceding
or subsequent frames. (The sequence composition may not be created
properly if the subject overlaps.)
Drag the slide bar or use to select the frames to combine
Press [MENU/SET]
• The selected frames are remembered, and the display goes to the preview
screen.
• Use
to select items and press [MENU/SET] to perform the following
operations.
– [Next]: Lets you select more frames for combining.
– [Reselect]: Discards the frame selected immediately before and lets you
select a different image.
Repeat steps - to select more frames to combine (from 3 to 40 frames)
Press to select [Save] and press [MENU/SET]
●
We recommend using a tripod to take pictures for Sequence Composition.
●
The picture will be saved in JPEG format.
To Next Page
Loading...
