- 131 -
Others
Troubleshooting
First, try out the following procedures (P131–139).
• The battery is not inserted correctly. (P14)
• The battery power is too low.
• Is [SLEEP MODE] (P26) Mode active?
> Press the shutter button halfway to cancel these modes.
• The battery power is too low.
• The battery power is too low.
• If you leave the camera on, the battery power will be exhausted.
> Turn the camera off frequently by using the [SLEEP MODE] Mode etc. (P26)
• Is the temperature of the battery excessively high or low? If it is, it will take longer than usual to
charge the battery or charging may remain incomplete.
• Are the terminals of the charger or battery dirty?
> Wipe off the dirt using a dry cloth.
If the problem is not resolved, it may be improved by selecting [RESET]
(P26)
on the
[SETUP] menu when taking pictures.
Battery and power source
The camera cannot be operated even when it is turned on.
The LCD monitor turns off while the camera is turned on.
The camera turns off immediately after it is turned on.
The [CHARGE] lamp flashes.
To Next Page
Loading...
Need help?
General
