- 75 -
Advanced (Recording pictures)
∫ Canceling the Travel Date
The Travel Date is automatically canceled if the current date is after the return date. If you
want to cancel the Travel Date before the end of the vacation, select [OFF] on the screen
shown in step
3 or 7 and then press [MENU/SET] twice. If the [TRAVEL SETUP] is set to
[OFF] in step
3, [LOCATION] will be also set to [OFF].
Note
• The Travel Date is calculated using the date in the clock setting and the departure date you set.
If you set [WORLD TIME] (P76) to the travel destination, the Travel Date is calculated using the
date in the clock setting and the travel destination setting.
• The Travel Date setting is memorized even if the camera is turned off.
• If [TRAVEL DATE] is set to [OFF], the number of days that have passed since the departure
date will not be recorded. Even if [TRAVEL DATE] is set to [SET] after taking the pictures,
which day of the vacation you took them is not displayed.
• If you set a departure date and then take a picture on a date before this departure date, [-]
(minus) is displayed in orange and the day of the vacation that you took the picture is not
recorded.
• If the Travel Date is displayed as [-] (minus) in white, there is a time difference that involves
date change between the [HOME] and [DESTINATION]. (It will be recorded)
• [LOCATION] cannot be recorded when taking motion pictures.
• Intelligent Auto Mode cannot be set. Setting of other Recording Mode will be reflected.
To Next Page
Loading...
Need help?
General
