- 121 -
Connecting to other equipment
∫ Viewing the contents of the built-in memory or card using the PC
(folder composition)
A new folder is created when pictures are taken in the following situations.
•
After [No.Reset] (P50) in the [Setup] menu has been executed
• When a card containing a folder with the same folder number has been inserted (such as when
pictures were taken using another maker of camera)
• When there is a picture with file number 999 inside the folder
∫ Disconnecting the USB connection cable safely
Select the [ ] icon in the task tray displayed on the PC, and then click
[Eject DMC-XXX] (XXX varies by model).
•
Depending on your PC’s settings, this icon may not be displayed.
• If the icon is not displayed, check that [Access] is not displayed on the LCD monitor of the
digital camera before removing the hardware.
∫ Connection in the PTP Mode
(Windows
R
XP, Windows Vista
R
, Windows
R
7, and Mac OS X only)
Select [PictBridge(PTP)] when connecting USB cable.
•
Data can now be read only from the card into the PC.
• When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP
Mode.
• Motion picture cannot be played back in PTP Mode.
For Windows: A drive ([Removable Disk]) is displayed in [Computer]
For Mac: A drive ([LUMIX], [NO_NAME] or [Untitled]) is displayed on the
desktop
•
Built-in Memory
• Card
DCIM: Images
1 Folder number
2 File number
3 JPG: Still pictures
MP4: MP4 Motion pictures
MISC: DPOF print
Favourite
AD_LUMIX: For Upload set
LUMIXUP.EXE Upload tool
“LUMIX Image Uploader”
¢ Cannot be created in the built-in memory.
AD_LUMIX
100_PANA
100_PANA
P
P
P
101_PANA
999_PANA
To Next Page
Loading...
