Recording
- 58 -
¢1 This can be set only when Intelligent Auto Mode is set.
¢2 The flash is activated twice. The subject should not move until the second flash is
activated. Interval until the second flash depends on the brightness of the subject.
[Red-Eye Removal] (P92) on the [Rec] menu is set to [ON], [ ] appears on the flash
icon.
Item Description of settings
[‡] ([Auto]) The flash is automatically activated when the recording
conditions make it necessary.
[]([iAuto])
¢1
[]
([Auto/Red-Eye])
¢2
The flash is automatically activated when the recording
conditions make it necessary.
It is activated once before the actual recording to reduce the
red-eye phenomenon (eyes of the subject appearing red in
the picture) and then activated again for the actual recording.
• Use this when you take pictures of people in low
lighting conditions.
[‰]
([Forced Flash On])
The flash is activated every time regardless of the recording
conditions.
• Use this when your subject is back-lit or under
fluorescent light.
[]
([Slow Sync./Red-Eye])
¢2
If you take a picture with a dark background landscape, this
feature will slow the shutter speed when the flash is activated
so that the dark background will become bright.
Simultaneously, it reduces the red-eye phenomenon.
• Use this when you take pictures of people in front of a
dark background.
[Œ]
([Forced Flash Off]
)
The flash is not activated in any recording conditions.
• Use this when you take pictures in places where the use
of flash is not permitted.
To Next Page
Loading...
