Before Use
- 8 -
1 Check that there are no foreign objects on the inner side of the side door.
A Brush (supplied)
B Side door
• If there is any foreign object, such as
lint, hair, sand, etc., on the
surrounding area, water will leak
within a few seconds causing
malfunction.
• Wipe it off with a dry soft cloth if there
is any liquid.
It may cause water leaks and
malfunction if you use the camera
with liquid adhered.
• If there is any foreign material,
remove with supplied brush.
• Be extremely careful to remove the
small sand etc. that may adhere to
the sides and corners of the rubber seal.
• Remove large foreign objects, wet sand, etc., using the shorter (harder) side of the brush.
2 Check for cracks and deformation of the rubber seal on the side door.
•
The integrity of the rubber seals may decrease after about 1 year, with use and age. To
avoid permanently damaging the camera the seals should be replaced once each year.
Please contact Panasonic’s Service Centre for related costs and other information.
3 Close the side door securely.
C [LOCK] switch (grey part)
D Red part
E Released state
F Locked state
• Lock the [LOCK] switch securely until
the red part is no longer visible.
• To prevent water seeping into the
camera, be careful not to trap foreign
objects such as liquids, sand, hair or
dust etc.
Check before using underwater
Do not open or close the side door in places with sand and dust, close to water, or
with wet hands. Sand or dust adhering may cause water leaks.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
