25
(ENG) VQT3L33
[Rec] Mode: ñ
Taking Pictures Using the Automatic
Function
(ñ: Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and the
recording conditions so we recommend this mode for beginners or those who
want to leave the settings to the camera and take pictures easily.
When the camera identifies the optimum scene, the icon of the scene concerned
is displayed in blue for 2 seconds, after which its colour changes to the usual red.
¢ Only when [ ] is selected
•
[
¦
] is set if none of the scenes are applicable, and the standard settings are set.
Press [MODE].
Press 3/4/2/1 to select
[Intelligent Auto], and then press
[MENU/SET].
Press the shutter button halfway to
focus and then press it fully to take
the picture.
1 Focus indication
• The AF area 2 is displayed around the
subject’s face by the Face Detection function.
In other cases, it is displayed at the point on
the subject which is in focus.
Scene Detection
¦ > ///
¢
///
DMC-FT3EB-VQT3L33_eng.book 25 ページ ２０１１年１月２５日 火曜日 午前９時０分
To Next Page
Loading...
