Panasonic Lumix DMC-FT3 - Selecting a Single Picture and Printing It; Selecting Multiple Pictures and Printing Them

- 154 -
Connecting to other equipment
Selecting a single picture and printing it
Press 2/1 to select the picture and then press
[MENU/SET].
Press 3 to select [Print start] and then press
[MENU/SET].
• Refer to P155 for the items which can be set before starting to
print the pictures.
• Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
Press 3.
Press 3/4 to select an item and then press [MENU/SET].
• If the print check screen has appeared, select [Yes], and print the pictures.
Item Description of settings
[Multi Select]
Multiple pictures are printed at one time.
• Press 3/4/2/1 to select the pictures, and then press [DISP.]. (When
[DISP.] is pressed again, the setting is cancelled.)
• After the pictures have been selected, press [MENU/SET].
[Select All] Prints all the stored pictures.
[Print Set (DPOF)] Prints the pictures set in [Print Set] only. (P134)
[Favorite] Prints the pictures set as favourites only. (P133)
Press 3 to select [Print start] and then press [MENU/SET].
• Refer to P155 for the items which can be set before starting to print the pictures.
• Disconnect the USB connection cable after printing.
PictBridge
Multi Print
Multi Print
Multi Print
Select
Select
Print
Print
Select
Print