Advanced (Recording pictures)
62
VQT1J59
∫ About [ ] or [ ]
• You can focus on the subject more quickly
than other AF modes.
• The picture may stop moving for a
moment before being brought into focus
when you press the shutter button
halfway. This is not a malfunction.
• The AF area displayed is bigger than
usual when taking pictures in dark places
or when using the digital zoom.
• The camera is focusing on all the AF
areas when multiple AF areas (max.
5 areas) light at the same time.
The focus position is not predetermined. It
is set to a position automatically
determined by the camera at the time of
focusing. If you want to determine the
focus position to take pictures, switch the
AF mode to [ ], [ ] or [ ].
• If the AF mode is set to [ ] or [ ],
the AF area is not displayed until the
picture is brought into focus.
• Switch the AF mode to [ ] or [ ] if it
is difficult to focus using [ ].
• The AF mode cannot be set in
[FIREWORKS] in scene mode.
• It is not possible to set [ ] in the
following cases.
– In [NIGHT SCENERY], [FOOD],
[STARRY SKY], and [AERIAL PHOTO]
in scene mode.
– In motion picture mode [ ].
• The camera may detect the subjects other
than a person as the face. In this case,
switch the AF mode to any modes other
than [ ] and then take a picture.
Press [ ] to display the [REC] mode
menu and select the item to set. (P55)
∫ About the jitter/movement detection
demonstration screen
Press [DISPLAY] to display [JITTER,
SUBJ. MOVE DEMO] when the
[STABILIZER] screen is displayed.
(Pictures cannot be recorded when the
[JITTER, SUBJ. MOVE DEMO] screen
appears.)
Press [DISPLAY] again to finish this mode.
A Jitter detection demonstration
B Movement detection demonstration
• It is also possible to display this screen
using the quick setting (P55).
• The camera automatically detects the
jitter and the movement of the subject and
displays these on the indicator.
• We recommend using a bright subject
with high contrast for the subject
movement demonstration.
• The jitter/movement detection
demonstration screen is an
approximation.
[STABILIZER]
Detecting jitter and compensating
for it
[MODE1]
()
The stabilizer operates
continuously and can assist
during photo composition.
[MODE2]
()
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF]
()
When the stabilizer is not
desired.
/SET
MENU
A
B
DMC-FX33_ENG.book 62 ページ ２００７年７月９日 月曜日 午後２時１６分
To Next Page
Loading...
