- 25 -
Preparation
• Press the shutter button halfway or turn the camera off and on to cancel [SLEEP MODE].
• [SLEEP MODE] is set to [5MIN.] in the Intelligent Auto Mode and the Clipboard Mode.
• [SLEEP MODE] does not work in the following cases.
– When using the AC adaptor
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
– [AUTO DEMO]
• The effect of the [LCD POWER SAVE] is lower in the Digital Zoom range compared to the
Optical Zoom range.
• The effect of the [LCD POWER SAVE] will not affect the image being recorded.
• Setting of [LCD MODE] has priority over the setting of [LCD POWER SAVE] regarding the
brightness of the LCD monitor.
• The Auto Review function is activated regardless of its setting when using Auto Bracket (P59),
[SELF PORTRAIT] (P63), [HI-SPEED BURST] (P69), [FLASH BURST] (P70) and
[PHOTO FRAME] (P73) in Scene Mode, Burst Mode (P100) and when recording still pictures
with audio (P104).
• In Intelligent Auto Mode, the Auto Review function is fixed to [2SEC.].
• [AUTO REVIEW] does not work in Motion Picture Mode.
q [ECONOMY]
You can conserve the battery life by setting these menus.
Also, the battery life is conserved by dimming the LCD monitor.
p [SLEEP MODE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[LCD POWER SAVE]:
Brightness of the LCD monitor is lowered. The battery life will be
conserved by lowering the image quality of the LCD monitor
further during the recording
¢
.
¢ Excluding the Digital Zoom range.
[OFF]/[ON]
o [AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[OFF]
[1SEC.]
[2SEC.]
[HOLD]: The pictures are displayed until one any of the buttons
is pressed.
To Next Page
Loading...
