Advanced (Recording pictures)
- 50 -
[REC] Mode: ñ· ¿¨
Taking Pictures using the Built-in Flash
Set the flash to match the recording.
Press 1 [‰].
Press 3/4 to select a mode.
• You can also press 1 [‰] to select.
• For information about flash settings that can be selected, refer to
“Available flash settings by Recording Mode”. (P52)
Press [MENU/SET].
• You can also press the shutter button halfway to finish.
• The menu screen disappears after about 5 seconds. At this time, the selected item is
automatically set.
A Photo flash
Do not cover the flash with your fingers or other objects.
Switching to the appropriate flash setting
To Next Page
Loading...
