Recording
- 56 -
Select this mode when you want to take pictures at a wedding reception or an indoor party
etc. This allows you to take pictures of people and the background with near real-life
brightness.
w Technique for Party Mode
•
Use the flash. (You can set to [ ] or [ ].)
• We recommend using a tripod and the self-timer for taking pictures.
• We recommend moving the zoom lever to Wide (1M) and being about 1.5 m (4.92 feet) from
the subject when taking pictures.
This mode allows you to take pictures with a candle-lit atmosphere.
w Technique for Candle Light Mode
•
This is more effective when taking pictures without using the flash.
Note
•
We recommend using a tripod and the self-timer for taking pictures.
• Shutter speed may slow down up to 1 second.
This takes pictures of a baby with a healthy complexion. When you use the flash, the light
from it is weaker than usual.
It is possible to set different birthdays and names for [Baby1] and [Baby2]. You can select
to have these appear at the time of playback, or have them stamped on the recorded
image using [Text Stamp] (P102).
w Birthday/Name setting
1 Touch [Age] or [Name].
2 Touch [SET].
3 Enter the birthday or name.
•
When the birthday or name is set, [Age] or [Name] is automatically set to [ON].
• If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4 Touch [Exit] to finish.
w To cancel [Age] and [Name]
Select the [OFF] setting in step
2.
Note
•
The age and name can be printed out using the “PHOTOfunSTUDIO” bundled software on the
CD-ROM (supplied).
• If [Age] or [Name] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [Age] or [Name] to [ON].
• Shutter speed may slow down up to 1 second.
[Party]
[Candle Light]
[Baby1]/[Baby2]
Birthday: Touch []/[] for each item to set
year/month/day, and touch [Set].
Name: For details on how to enter characters,
refer to “Entering Text” on P93.
To Next Page
Loading...
