VQT2U49 (ENG)
20
Setting the Menu
This section describes how to select the Programme AE Mode settings, and the
same setting can be used for the [MOTION PICTURE] menu, [PLAYBACK] menu
and [SETUP] menu as well.
Example:To change the [AF MODE] from [Ø] (1-area-focusing) to [š]
(Face detection) in Programme AE mode with the focus selector
switch set to [AF].
Press [MENU/SET] to close the menu.
Press [MENU/SET] to display the menu.
Press 3
/
4 to select [AF MODE], and then
press 1.
• Depending on the item, its setting may not appear or
it may be displayed in a different way.
Press 3/4 to select [š] and then press
[MENU/SET] to set.
Switching to other menus
e.g.: Switching to the [SETUP] menu
1 Press [MENU/SET] to display the menu.
2 Press 2.
3 Press 4 to select the [SETUP] menu icon
[].
4 Press 1.
•
Select a menu item next and set it.
FZ100EB_eng.book 20 ページ ２０１０年６月２２日 火曜日 午前１０時５２分
To Next Page
Loading...
