- 117 -
Recording
Taking Pictures with different image effects
(Creative Control Mode)
Recording modes:
This mode records with additional image effects. You can set the effects to add by selecting
example images and checking them on the screen.
1
Set the mode dial to [ ].
2
Press 3/4 to select image effects (filters) and then
press [MENU/SET].
• The image effect of the selected example image will be applied in a
preview display
A.
• A brief description of selected image effect appears when you press
[DISP.].
Note
•
The displayed image on the recording screen and the preview of the selected image effect may differ
from the actual recorded image.
• Creative Control settings are memorised even if the camera is turned off.
• White Balance will be fixed to [AWB], and [Sensitivity] will be fixed to [AUTO].
• In [Miniature Effect] of Creative Control Mode, Defocus Control cannot be used.
∫ Adjust the effect to fit your preferences.
The strength and colours of the effects can be easily adjusted to fit your preferences.
1 Press the rear dial to display the options.
2 Press 3/4 to select the item
[]
:
Adjust the brightness.
[]
:
Adjust the background blur.
[]
:
Adjust the image effect.
•
The items that can be set differ depending on which Creative Control Mode is
currently set.
For information on each image effect, refer to
“Items that can be set”.
3 Press 2/1 or rotate the rear dial to adjust.
•
Press [ ] to reset the setting to the default state (AUTO).
• To adjust automatically, reset the setting to the default state (AUTO).
4 Press [MENU/SET] or the rear dial to set.
To Next Page
Loading...
