- 122 -
Recording
This effect blurs the overall image to produce a soft feel.
This effect transforms pin-points of light into a star effect.
This effect leaves one selected color to emphasize impressiveness.
[Soft Focus]
Items that can be set
Extent of defocus Weak defocus Strong defocus
Note
•
Display of the recording screen will be delayed more than usual and the
screen will look as if frames are dropping.
[Star Filter]
Items that can be set
Length of shine Short Long
Note
•
Display of the recording screen will be delayed more than usual and the
screen will look as if frames are dropping.
[One Point Color]
Items that can be set
Amount of colour
left
Small amount of
colour
Large amount of
colour
∫ Set the colour to leave in
Set the colour to leave in by selecting a location on the screen.
1 Press function button to display the setting screen.
(DMC-FZ200) : [Fn3]
(DMC-FZ60) : [Fn2]
2 Put the centre frame onto the colour you want to leave,
and press [MENU/SET].
Note
•
Depending on the subject, the set colour may not be left in.
To Next Page
Loading...
