- 15 -
Before Use
Cursor button:
Selection of items or setting of values etc., is performed.
[MENU/SET] button:
Confirmation of setting contents, etc., is performed.
•
This document expresses the up, down, left, and right of the cursor button as follows, or as
3
/
4
/
2
/
1
.
There are 2 ways to operate the rear dial, rotating left or right, and deciding by pressing.
Rotating:
Selection of items or setting of values is performed during the various settings.
Pressing:
Operations that are the same as [MENU/SET] button, such as determine settings, etc.,
are performed during the various settings.
•
Rear dial is described as follows in these operating instructions.
Cursor buttons/[MENU/SET] button
e.g.: When you press the 4 (down) button
or Press 4
Rear Dial
e.g.: Rotating left or right e.g.: Pressing the rear dial
To Next Page
Loading...
