- 62 -
Basic
• MF position will be memorised in the following cases:
– Turning the camera off
– When switching to a type of focus other than Manual Focus
– When switched to Playback Mode
• Zoom position will be set all the way to wide when the [Zoom Resume] is set to [OFF].
• When [MF Resume] is set to [OFF], MF position will be the distance focused at the time of recording
in Manual Focus.
• Depending on the recording conditions, the memorised MF positions and resumed MF positions
might be different.
• Refer to P100 for details.
[Lens Resume]
This unit memorises a zoom position and an MF (Manual Focus)
position when it is turned off.
[Zoom Resume]:
When you turn this unit on, the zoom positions when you last turned
this unit off are automatically restored.
[ON]/[OFF]
[MF Resume]:
It will memorise the MF position set with the Manual Focus. It will
resume the memorised Manual Focus position when you return to
Manual Focus Recording.
[ON]/[OFF]
[MF Assist]
In Manual Focus, the screen to facilitate focusing on the subject is
displayed.
[ON]:
The centre of the screen is enlarged over the whole screen.
[OFF]
To Next Page
Loading...
