- 65 -
Basic
• When the [Reset] setting is selected during recording, the operation that resets the lens is also
performed at the same time. You will hear the sound of the lens operating but this is normal and not
indicative of malfunctioning.
• When the Recording Mode settings are reset, data registered with [Face Recog.] will be also reset,
too.
• The folder number and the clock setting are not changed.
• When [Setup] menu settings are reset, the following settings are also reset.
– The birthday and name settings for [Baby1]/[Baby2] and [Pet] in Scene Mode.
– The [Travel Date] setting. (Departure date, return date, destination)
– The [World Time] setting.
– The [Cust.Set Mem.] setting.
– Position memorised in [Lens Resume]/[Menu Resume].
[Reset] The [Rec] or [Setup] menu settings are reset to the initial settings.
[USB Mode]
Select the USB communication system after or before connecting the
camera to your PC or your printer with the USB connection cable
(supplied).
y [Select on connection]:
Select either [PC] or [PictBridge(PTP)] if you connected the camera to
a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
To Next Page
Loading...
