Panasonic LUMIX DMC-FZ28 - Using the Quick Menu

VQT1S39 (ENG)
16
Press [MENU/SET] to close the menu.
By using the quick menu, some of the menu settings can be easily found.
•
Some of the menu items cannot be set by the modes.
• You can set the following items in detail by pressing [DISPLAY].
[WHITE BALANCE]/[AF MODE]/[STABILIZER]
Press 3/4 to select [AF MODE].
• Select the item at the very bottom, and press 4 to
move to the second screen.
Press 1.
• Depending on the item, its setting may not appear or it
may be displayed in a different way.
Press 3/4 to select [š].
Press [MENU/SET] to set.
Using the quick menu
Press and hold down the joystick in
recording mode until the [Q.MENU] is
displayed
Press 3
/4/2/1 to select the menu item and
the setting and then press [MENU/SET] to
close the menu.
A The items to be set and the settings are displayed.
Q.MENU
A
DMC-FZ28PL-VQT1S39_mst.book 16 ページ ２００８年７月１５日 火曜日 午前９時４３分