For Episode 3 PROGRAM
AUTO MODE - “P”
The P mode can be
considered to be the ISO
priority mode for this
camera.!
You can set the ISO and the
camera will set the aperture
and shutter speed
according to the amount of
light reaching the sensor.!
If you want to alter the settings that the camera has suggested you
can use what is called the “Program Shift” operation to be able to set
the aperture that you want - to get the right depth of field. !
Program Shift isn't the same as exposure compensation. !
Exposure compensation allows you to over ride the camera metering
circuit to make the image darker or lighter.!
When using P Shift the exposure remains the same the element that
will change in the image will depend on whether you are using the
aperture or the shutter speed to influence the image outcome.!
To Next Page
Loading...
