Program shift is indicated by a double headed arrow visible on the
LCD screen.!
As I first indicated at the beginning of this section I said the P Mode is
almost my ISO Priority mode.!
So what ISO should you use. Well it is always best to use the lowest
ISO that you can. !
The lower the ISO setting the less digital noise will appear in the image
and the more of the expanse of highlight to shadows in your image
can be captured (called dynamic range).!
If you cannot use the lowest ISO because the shutter speed would be
too long at even the widest aperture of f2.8 then you need to choose
an ISO which would allow these hand held exposures.!
To Next Page
Loading...
