Preparation
Inserting
and Removing the Card (optional)/the
Battery
• Check that this unit is turned off.
• Close the flash.
•
We
recommend using a Panasonic card.
oSlide the card/battery door to open it.
• Always use genuine Panasonic batteries
(CGR-S006A).
•
If
you use other batteries, we cannot guarantee the
quality of this product.
mBattery: Insert until it
is
locked by
......
. the lever ® being careful about the
direction you insert it. Pull the lever
®
in
the direction
of
the arrow to
remove the battery.
Card: Push it fully until
it
clicks
being careful about the direction
you insert
it.
To
remove the card,
push the card until it clicks, then
pull the card out upright.
@: Do
not
touch the connection terminals
of
the card.
• The card may
be
damaged if it is not fully
inserted.
ill O:Close the card/battery door.
8:Slide
the card/battery door to the end
and then close it firmly.
• If the card/battery door cannot
be
completely
closed, remove the card, check
its
direction and
then insert it again.
16 VQT2G40 (ENG)
To Next Page
Loading...
