Preparation
)
mPress [MENU/SET].
® [MENU/SET] button
® Cursor buttons
• The
clock
is
not
set when the camera is shipped.
oTurn the camera on.
• The [PLEASE SET THE CLOCK] message
appears. (This message does not appear
in
[PLAYBACKj Mode.)
iJ
Press
~/~
to
select the items (year, month,
...
day, hour, minute,
display
sequence
or
time
display
format), and press
£./T
to
set.
fir
Cancel
without
setting the clock.
D Press [MENU/SET]
to
set.
• After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording Mode, and check that the display reflects the settings that were
performed.
• When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the "Changing the clock setting" procedure
below.
Select [CLOCK SET] in the [REC]
or
[SETUP] menu, and press
~.
• It can be changed
in
steps 3 and 4 to set the clock.
• Once a charged battery has been installed
for
24 hours, the
clock
setting is maintained
for
3
months
using the built-in
clock
battery even
without
the battery.
(ENG) VQT2G40 17
To Next Page
Loading...
