•
Care
of
the
camera
• Do
not
strongly
shake
or
bump
the
camera
by
dropping
or
hitting
it.
Do
not
subject
to
strong
pressure.
The camera may malfunction, recording pictures may become impossible, or the lens, the LCD
monitor or the external case may
be
damaged.
• Do
not
touch
the
lens
or
the
sockets
with
dirty
hands.
Also,
be
careful
not
to
allow
liquids,
sand
and
other
foreign
matter
to
get
into
the
space
around
the
lens,
buttons
etc.
• Retract the lens before carrying the camera or playing back pictures.
• Be
particularly
careful in
the
following
places as
they
may
cause
this
unit
to
malfunction.
- Places with a lot
of
sand or dust.
- Places where water can come into contact with this unit such as when using it on a rainy day
or
on
a beach.
•
This
camera
is
not
waterproof.
If
water
or
seawater
splashes
on
the
camera, use a
dry
cloth
to
wipe
the
camera
body
carefully.
If
the
unit
does
not
operate normally, please
contact
the
dealer
where
you
purchased the
camera
or
the
repair
service
center
.
•
About
Condensation
(When
the
lens
or
the
Viewfinder
is
fogged
up)
• Condensation occurs when the ambient temperature or humidity changes.
Be
careful
of
condensation since it causes lens stains, fungus and camera malfunction.
• If condensation occurs, turn the camera off and leave it for about 2 hours. The fog will
disappear naturally when the temperature
of
the camera becomes close to the ambient
temperatu
re.
6 VQT2G40 (ENG)
To Next Page
Loading...
