Preparation
12
VQT0Q28
Quick Guide
This is the overview of the procedure to
record and playback pictures with the
camera. For each operation, be sure to
refer to the corresponding pages.
1 Charge the battery. (P13)
• When the camera is shipped, the
battery is not charged. Charge the
battery before use.
2 Insert the battery and the card.
(P15, 16)
3 Turn the camera on to take
pictures.
• Set the clock. (P22)
1 Set the mode dial to [ ].
2 Open the flash.
(When using the flash) (P40)
3 Press the shutter button to take
pictures. (P31)
4 Play back the pictures.
1 Set the mode dial to [ ].
2 Select the picture you want to view.
(P50)
OFF ON
M
S
A
SCN
P
OPEN
M
S
A
SCN
P
VQT0Q28ENG.book 12 ページ ２００５年２月１４日 月曜日 午後５時３１分
To Next Page
Loading...
