Playback (advanced)
90
VQT0Q28
∫ SD Slide Show
If you insert a card including the SD
Slide Show edited with the [SD Viewer for
DSC] which is in the supplied CD-ROM,
and then turn the camera on in playback
mode, the confirmation screen appears.
Select [YES] and press 1 to start the SD
Slide Show. Select [NO] and press 1 to
start normal playback.
• Pictures set with the DPOF Slide Show by
the [SD Viewer for DSC] cannot be played
back as a Slide Show.
• Motion images cannot be played back in
the Slide Show.
• When you play back pictures with audio,
the next picture appears after the
playback of the audio is finished (when
[AUDIO] is set to [ON]).
You can record the audio after taking a
picture (max. 10 seconds per picture).
1 Select the picture and start audio
recording.
• When audio has already been
recorded, the confirmation screen
appears. Press 4 to select [YES], and
press 1 to start audio recording. (The
original audio is overwritten.)
• The audio dubbing cannot be used with
the following pictures.
– Motion images
– Protected pictures
– Pictures recorded after setting the
quality to [TIFF]
Adding Audio to Recorded
Pictures
[AUDIO DUB.]
AUDIO
DUB.
START EXIT
MENU
100
_
0001
1/19
SELECT
2560
VQT0Q28ENG.book 90 ページ ２００５年２月１４日 月曜日 午後５時３１分
To Next Page
Loading...
