Preparation/Basic
20
SQT0919 (ENG)
Rotating:
Selection of items or setting of values is performed during the various settings.
•
These operating instructions describe operations of the front dial/rear dial as follows:
Allows you to set the aperture, shutter speed, and other settings when in ///
modes.
•
In [Dial Set.] in the [Custom] menu, you can change the operation methods of the rear dial and
front dial.
Temporarily changing the items assigned to the front/rear dials ([Dial Operation
Switch])
You can temporarily change the items assigned to the front/rear dials using the function
button to which [Dial Operation Switch] is assigned.
[Dial Operation Switch] is assigned to [Fn11] at the time of purchase. (P23)
•
You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation Switch
Setup] in [Dial Set.] in the [Custom] menu.
1 Press [Fn11].
•
A guide will be displayed showing the items temporarily
assigned to the front/rear dials.
2 Rotate the front/rear dials while the guide is
displayed.
•
The setting of the item assigned to the dial you have rotated will change. To change the
setting of the item assigned to the other dial, rotate it.
3 Press [MENU/SET] and set.
•
When the recording screen is displayed, the original assignment settings for the dials are
restored.
• Items that are temporarily assigned to the front/rear dials can be used only while the guide
(step
1) or setting screen (step 2) is displayed. If you display a menu or turn off the camera
while making adjustments, the original assignment settings will be restored.
Front Dial/Rear Dial
e.g.: When rotating
the front dial to the
left or right
e.g.: When rotating
the rear dial to the
left or right
Mode dial Front dial Rear Dial
Programme Shift Programme Shift
Aperture value Aperture value
Shutter speed Shutter speed
Aperture value Shutter speed
98
98
0
ISOISOISOISO
WBWBWBWB
DMC-G7KHWbody_GN-SQT0919_eng.book 20 ページ ２０１５年５月２８日 木曜日 午後２時３８分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
