201
6. Shutter and Drive Settings
Taking Pictures with the Self-timer
Applicable modes:
1
Set the drive mode dial to [ ].
2
Press the shutter button halfway to focus and
then press it fully to take the picture.
• Focus and exposure will be set when the shutter button
is pressed halfway.
• After the self-timer indicator flashes, recording starts.
∫ Changing the time setting for the self-timer
1 Select the menu. (P63)
2 Press 3/4 to select the mode and then press [MENU/SET].
•
Exit the menu after it is set.
> [Rec] > [Self Timer]
Picture is taken 10 seconds after shutter is pressed.
After 10 seconds the camera takes 3 pictures at about 2 seconds intervals.
Picture is taken 2 seconds after shutter is pressed.
• When using a tripod, etc., this setting is a convenient way to avoid the jitter
caused by pressing the shutter button.
MENU
To Next Page
Loading...
Need help?
General
