Recording
- 128 -
To allow recording using the same settings, up to 4 sets of current camera settings can be
registered using [CUST. SET MEM.].
1 Select [CUST. SET MEM.] in the [CUSTOM] menu. (P62)
2 Press 3/4 to select the custom set ( , etc.) to register and then press [MENU/
SET].
•
Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Registering Personal Menu Settings (Registering custom settings)
Preparations: Set in advance the Recording Mode you wish to save and select the
desired menu settings on the camera.
Custom set Description of settings
The settings are registered for on
the mode dial.
•
You can record using by simply rotating
the mode dial to the corresponding
position. If you register the custom
settings you use often, it is then
convenient to use them.
The settings are registered for on
the mode dial.
• You can register up to 3 sets of
custom settings and use the different
sets as condition demand.
To Next Page
Loading...
