Basic
- 38 -
∫ About the tilt sensor display
With the tilt sensor displayed, it is easy to correct the tilt of the camera etc.
1 Press [DISP.] several times to display the tilt sensor.
2 Check the tilt of the camera.
A Horizontal direction:
Correcting tilt to the left
B Vertical direction:
Correcting downward tilt
•
When the tilt of the camera is little, the indicator changes to green.
• When recording with a vertical orientation, the display automatically switches to a
vertically orientated display.
Note
•
Even after correcting the tilt, there may still be an error of approximately ± 1°.
• When [Fn BUTTON SET] of the [CUSTOM] menu is set to [LEVEL GAUGE], you can switch
the tilt sensor display on/off by pressing function button.
• When tilted significantly upwards or downwards to record, the tilt sensor display may not be
displayed correctly, and the Direction Detection Function (P31) may not work correctly.
To Next Page
Loading...
