Panasonic Lumix DMC-GX1K - Installing Supplied Software

41
(ENG) VQT3T96
• Before inserting the CD-ROM, close all running applications.
Check the environment of your PC.
• Operating environment of “PHOTOfunSTUDIO 7.0 HD Edition”
–OS:
Windows
R
XP (32bit) SP2/SP3,
Windows Vista
R
(32bit) or SP1/SP2,
Windows
R
7 (32bit/64bit) or SP1
–CPU:
Pentium
R
III 500 MHz or higher (Windows
R
XP),
Pentium
R
III 800 MHz or higher (Windows Vista
R
),
Pentium
R
III 1 GHz or higher (Windows
R
7)
–Display:
1024k768 pixels or more (1920k1080 pixels or more recommended)
–RAM:
512 MB or more (Windows
R
XP/Windows Vista
R
),
1 GB or more (Windows
R
7 32bit),
2 GB or more (Windows
R
7 64bit)
–Free hard disk space:
450 MB or more for installing software
• Refer to the operating instructions of “PHOTOfunSTUDIO 7.0 HD Edition” (PDF) for
further operating environment.
• For details on SILKYPIX Developer Studio 3.1 SE, please read the support site given on
P40.
Insert the CD-ROM with the supplied software.
• When you insert the supplied CD-ROM, the install menu will start.
Click on the [Recommended Installation].
• Proceed with installation according to messages appearing on the screen.
Note
•
The software compatible with your PC will be installed.
• “PHOTOfunSTUDIO 7.0 HD Edition” is not compatible with Mac.
• On the Mac, SILKYPIX can be installed manually.
1 Insert the CD-ROM with the supplied software.
2 Double-click on the automatically displayed folder.
3 Double-click the icon in the application folder.
Installing supplied software
DMC-GX1X&GX1K&GX1PP-VQT3T96_eng.book 41 ページ ２０１１年１０月１３日 木曜日 午後２時５４分