24
This touch screen is a type that detects pressure.
Note
If you use a commercially available liquid crystal protection
sheet, please follow the instructions that accompany the sheet.
(Some liquid crystal protection sheets may impair visibility or
operability.)
If a commercially available LCD protection sheet is used, a little
extra pressure may be required if you notice that the touch
screen is not responsive.
Avoid having the hand holding the camera accidently apply
pressure to the touch screen. Doing so may affect the touch
screen operation.
Do not press on the LCD monitor with hard pointed tips, such as
ball point pens.
Do not operate with your fingernails.
Wipe the LCD monitor with dry soft cloth when it gets dirty with finger prints and others.
Do not scratch or press the LCD monitor too hard.
Touch Screen
Touch the screen
To touch and release the touch screen.
Drag
A movement without releasing the touch
screen.
Use this to perform tasks such as selecting
icons or images displayed on the touch
screen.
When selecting features using the touch
screen, be sure to touch the center of the
desired icon.
This is used to move the AF area, operate
the slide bar, etc.
This can also be used to move to the next
image during playback, etc.
Just by touching the subject to focus, it will focus on the subject and take the picture
automatically.
1
Touch [ ].
2
Touch [ ].
Icon will change to [ ], and taking a picture with the
Touch Shutter function becomes possible.
3
Touch the subject you wish to focus on, and then
take a picture.
AF area with same function as [®]inAFmodeis
displayed at the position you touch, and picture is taken
when it is focused when the AF mode is set to [s], [ ], [ ], or [®].
4
Touch [ ] to cancel the Touch Shutter function.
Taking pictures using the Touch Shutter function
×
To Next Page
Loading...
Need help?
General
